. Garage Doors: Common Problems and How to Solve Them

Garage Doors: Common Problems and How to Solve Them

Garage Doors

Garage doors are one of the most simple-to-use technologies in the world. All there is to do when using a garage door is to press the buttons on the remote so that the door can move up or down. However, sometimes, the most simple-to-use technologies can stop working and create an inconvenience in your daily life.

Most of the time, the problem with your garage door can be very simple and easy to fix. However, sometimes, the problem isn’t that simple to figure out and is even more complex to solve. This is why you need garage door professionals like those from Fix Garage Doors CA.

Now, the question is, how would you figure out if the garage door can be fixed by yourself or if you need the help of a professional? This is why in this post, we will be discussing some of the very common garage door problems, whether you can fix them by yourself, and how you can fix them.

Problem 1: The Garage Door Does Not Close All The Way Down

One of the problems that you could face with your garage door is that it may not close all the way down, getting stuck in mid-air. This could be due to the fact that your close-limit switch or the photo eye may need readjustment or realignment.

The close-limit switch or the photo eye sensor is a safety feature that does not let the garage door close on a human being, animal, or any other object. If this switch is not set correctly, it may not let the garage door close or cause it to stop or open back up when you attempt to close it.

The other reason behind your garage door not closing all the way down is that there could be any other object blocking the line of sight of the photo eye sensor. If there is any object blocking the line of sight of the sensor, such as leaves or debris, it can cause the garage door to revert back from moving down.

How to fix the photo-eye sensor?

If the sensor is misaligned and needs readjustment, the light in the garage door will blink profusely. Here’s how you can fix the photo eye in less than five minutes:

  1. Adjust and align the pivotal brackets so that the photo eyes are parallel to them.
  2. Remove all the objects that are blocking or are in the way of the photo eye’s infrared beam.
  3. Wipe the photo eye using a soft cloth to remove all the dirt, cobwebs, and debris from its lens.

Problem 2: The Garage Door Makes Rattling Noises While Opening and Closing

You may have experience rattling sounds while opening and closing your garage door. This is because the rollers of the door are worn out and need lubrication or changing, and the hardware of the door is loose and needs to be tightened.

How to stop the rattling noise?

Here is how you can fix the rattling noise in a few simple, easy steps:

  1. Use a silicone-based lubricant and spray it on the springs, bearings with metal wheels, hinges, and on the lifting cable of the garage. However, be careful to not spray on the rollers without the bearings as it can damage the garage door.
  2. With the help of a wrench, tighten the loosened nuts and bolts of the garage door and track.
  3. Replace the worn rollers and hinges. However, it is advised to call a professional for this step as it is quite dangerous to do this step on your own.

Problem 3: The Keypad or the Remote Control of the Garage Door Stops Working

Most garage doors have a keypad or a remote to control the movement of the door. A fault in any of those devices can cause your garage door to not work properly.

The major cause for your keypad or battery not working maybe that the batteries are dead. Replacing the dead batteries with new ones will solve the problem.

If the remote control of the garage door still doesn’t work after replacing the battery, then maybe the distance between the device and the door is far too great.

Moving a bit closer to the door will help the signal reach the detectors, which will cause the door to start working.

If your garage door has a keypad and replacing its batteries does not solve the problem, then maybe the issue is with the programming of the keypad.

You can refer to the manual given to you at the time of purchase/installment to reprogram the keypad. If doing all of this still fails to make your keypad work, then the problem may be with the antenna on the motor. Straighten the antenna to ensure that it receives the signals sent out by the keypad.

However, even after doing all the above-mentioned steps, if the problem with the garage door or the keypad/remote control is not solved, then it is best to call a professional for help.